Toshiba LF494 - Manual (Page 119)

TOSHIBA
6 F 8 A 0 7 7 4
10.4 High and l^iw Limit Alarms;
Proceed hs follows to use the high and low limit alarms:
High and Low limit value setting
Set the high and/or low limit alarm enable/disablc status to ON and
sec the Jimil value for high andy'or low alarm. See
8 2 Л 2 ,
''High and I jiw
Limit
Alarms." To disable the high or low limit alarm, set its enable/disablc status to OFF.
DO function setting
Set DOl and/or D02 (option) as high and/or low limit alarm outputs, and select the
active status. Normal Open or Normal Close.
Sees.2.9, ^^Digital J/0"
-
1 1 8
-