Toshiba – Toshiba LF494 User Manual
Page 75
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6 F 8 A 0 7 7 4
8^2Л1 Preset Count Value
The preset count vaUie is used lo preset the lotaJi
7
er.
I’he
presei count value can be set from
Oto 9999У9У9.
NOTE
Totalizer counting is effective only for the specified direction flow.
To operate the totalizer, it is preferable to set the indicating unit (UNIT 1 and/or UNIT 2) to
one of the units appropriate for totalization just to make sure it is operating correctly.
In case of the converter for special specifications {refer to
l.?>3
^'Converter for Special
specifications'’), you can select Preset Function. For detail, sec 8.2.20 “Preset Function”.
Proceed as follows to check or change the preset count value.
I
To check the preset count value:
Key operation
Display example
Description
SET
□
HI; PRESET
000003DO
Press [SET] first to start the items selection
sequence and select HI: PRESETfrom among the
configuration items using [ ► ] and [
a
] keys.
Then press [SET] again to display the preset
count value.
SET
□
HI; PRESET
Pressing [SETl, the system returns to the items
selection sequence.
-
74
-