Toshiba – Toshiba LF494 User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TOSHIBA
6 F 8 A 0 7 7 4
(4) Hysteresis
Tlic hysteresis is the dead band used when multiple ranges arc switched, The hysteresis can
be set from 0 to 25% in increments of 0.1%, The hysteresis setting is needed only when
automatic selection of multiple ranges is used.
['Hie setting sequence]
The following is the ssetting sequence of span (range).
if multtpk range is selected, compulsory range 1 to range
4
ami hysteresis settings are
displayed.
-
58
-
Advertising
This manual is related to the following products: