V.8/v.8bis commands, A8e - v.8 and v.8bis operation controls, Syntax – Comtrol AT Commands User Manual

Page 104: Defined values

Advertising
background image

AT Commands for CX81801/CX06833/CX81300/CX06827 Modems Reference Manual

Conexant

102184B

3-78

3.2.7

V.8/V.8bis Commands

+A8E - V.8 and V.8bis Operation Controls

This command is defined for two conditions: as a parameter while the modem is on-hook,
and as an action command while the modem is off-hook. If enabled, V.8 negotiation does
not preclude simultaneous implementation of other negotiation means (e.g., V.8bis, V.18,
V.32bis Annex A).

This command is a compound parameter if issued while the modem is on-hook, used to
precondition V.8 and V.8bis originating and answering operation. It is issued by the DTE
before the Dial (D) or Answer (A) command, regardless of the state of the +FCLASS
parameter.

This command is an action command if issued while the modem is off-hook, to (re)start
V.8 or V.8bis negotiation. For example, if initial V.8 negotiation failed, but subsequent
T.30 negotiation indicated V.8 capability, this command may be used to initiate V.8
negotiation.

Syntax

+A8E=<v8o>,<v8a>,<v8cf>[,<v8b>][,<cfrange>][,<protrange>]

Defined Values

<v8o>

Decimal number which enables/disables issuance of +A8x
indications during modem-controlled V.8 origination
negotiation.

1

Enable DCE-controlled V.8 origination
negotiation without +A8x indications. (Default.)

6

Enable DCE-controlled V.8 origination
negotiation with +A8x indications.

<v8a>=

Decimal number which enables/disables issuance of +A8x
indications during modem-controlled V.8 answer negotiation.

1 Enable

DCE-controlled

V.8 answer negotiation

without +A8x indications. (Default.)

5 Enable

DCE-controlled

V.8 answer negotiation

with +A8x indications.

<v8cf>=

Set the V.8 CI signal call function to the hexadecimal octet
XY.

00 (Default.)
21
C1

<v8b>=

Decimal number which enables/disables V.8bis negotiation.

0 Disable

V.8bis

negotiation.

1

Enable V.8bis negotiation. (Default.)

<cfrange>= “<string

of

values>“.

Applicable only for <v8a>=5. Not

supported.

< protrange >=

“<string of values>“. Applicable only for <v8a>=5. Not
supported.

Advertising