Comtrol AT Commands - Manual (Page 14)

AT Commands for CX81801/CX06833/CX81300/CX06827 Modems Reference Manual
Conexant 102184B
1-2
1.1.4 ConfigurACE II for Windows Utility Program
The PC-based ConfigurACE II for Windows utility program allows the OEM to
customize SmartACF and SmartACFL modem firmware to suit specific application and
country requirements. ConfigurACE II for Windows allows programming of functions
such as:
• Loading of multiple sets of country parameters
• Loading of NVRAM factory profiles
• Call progress and blacklisting parameters
• Entry of S parameter maximum/minimum/default values
• Limitation of transmit levels
• Modification of factory default values
• Customization of the ATI4 response
• Customization of fax OEM messages
• Enabling of Telephony Extension features
• Direct Mode
This program modifies the hex object code which can be programmed directly into the
system Flash ROM. Lists of the generated parameters can be displayed or printed.
Conexant-provided country parameter files allow a complete set of country-specific call
progress and blacklisting parameters to be selected.
Refer to the ConfigurACE II for Windows software for a detailed description of
capabilities and the operating procedure.
1.2 Reference Documentation
Document Title Document No.
CX81300 SmartACF Modem Data Sheet 100488
CX06827 SCXXD Modem Device Set Data Sheet 101098
CX06833 SMXXD Modem Device Set Data Sheet 101840
CX81801-3x SmartV.XX Modem with 128-Pin TQFP Data Sheet 101898
CX81801-7x/8x SmartV.XX Modem with 128-Pin TQFP Data Sheet 102199
CX81801-4x SmartV.XX Modem with 28-Pin CTLGA Data Sheet 102025
CX81801-9x SmartV.XX-V.92 Modem with 28-Pin CTLGA Data Sheet 102179