Comtrol AT Commands - Manual (Page 151)

AT Commands for CX81801/CX06833/CX81300/CX06827 Modems Reference Manual
102184B Conexant 3-125
Code Message Meaning
and Xn.)
80 +ER: ALT Sent when the modem has connected in the MNP mode of error correction, and +ER: message
reporting has been enabled. (See S95, Wn, and Xn.)
81 +ER: ALT-
CELLULAR
The modem has connected in the MNP 10 mode and cellular power level adjustment is
enabled (")M1 or )M2").(See S95, Wn, and Xn.)
83 LINE IN USE The modem attempted to go off-hook when an extension was already occupying the line.
84 CONNECT 33600 The modem has connected to the line, the DTE speed is 33600 bps and the DTE speed
reporting is enabled.
91 CONNECT 31200 The modem has connected to the line DTE speed is 31200 bps and the modem is to report the
DTE speed upon connecting.
134 +MCR: B103 The modem has connected to the line with Bell 103 modulation and modulation reporting is
enabled. (See +MR, S95 and Xn.)
135 +MCR: B212 The modem has connected to the line with Bell 212 modulation and modulation reporting is
enabled. (See +MR, S95 and Xn.)
136 +MCR: V21 The modem has connected to the line with ITU-T V.21 modulation and modulation reporting is
enabled. (See +MR, S95 and Xn.)
137 +MCR: V22 The modem has connected to the line with ITU-T V.22 modulation and modulation reporting is
enabled. (See +MR, S95 and Xn.)
138 +MCR: V22B The modem has connected to the line with ITU-T V.22 bis modulation and modulation reporting
is enabled. (See +MR, S95 and Xn.)
139 +MCR: V23 The modem has connected to the line with ITU-T V.23 modulation and modulation reporting is
enabled. (See +MR, S95 and Xn.)
140 +MCR: V32 The modem has connected to the line with ITU-T V.32 modulation and modulation reporting is
enabled. (See +MR, S95 and Xn.)
141 +MCR: V32B The modem has connected to the line with ITU-T V.32 bis modulation and modulation reporting
is enabled. (See +MR, S95 and Xn.)
142 +MCR: V34 The modem has connected to the line with ITU-T V.34 modulation and modulation reporting is
enabled. (See +MR, S95 and Xn.)
144 +MCR: K56 The modem has connected to the line with K56flex modulation and modulation reporting is
enabled. (See +MR, S95 and Xn.)
145 +MCR: V90 The modem has connected to the line with ITU-T V.90 modulation and modulation reporting is
enabled. (See +MR, S95 and Xn.)
150 +MRR: 32000 The modem has connected to the line at 32000 bps and carrier reporting is enabled. (See S95
and Xn.)
151 +MRR: 34000 The modem has connected to the line at 34000 bps and carrier reporting is enabled. (See S95
and Xn.)
152 +MRR: 36000 The modem has connected to the line at 36000 bps and carrier reporting is enabled. (See S95
and Xn.)
153 +MRR: 38000 The modem has connected to the line at 38000 bps and carrier reporting is enabled. (See S95
and Xn.)
154 +MRR: 40000 The modem has connected to the line at 40000 bps and carrier reporting is enabled. (See S95
and Xn.)
155 +MRR: 42000 The modem has connected to the line at 42000 bps and carrier reporting is enabled. (See S95
and Xn.)
156 +MRR: 44000 The modem has connected to the line at 44000 bps and carrier reporting is enabled. (See S95
and Xn.)
157 +MRR: 46000 The modem has connected to the line at 46000 bps and carrier reporting is enabled. (See S95
and Xn.)
158 +MRR: 48000 The modem has connected to the line at 48000 bps and carrier reporting is enabled. (See S95
and Xn.)
159 +MRR: 50000 The modem has connected to the line at 50000 bps and carrier reporting is enabled. (See S95
and Xn.)
160 +MRR: 52000 The modem has connected to the line at 52000 bps and carrier reporting is enabled. (See S95
and Xn.)
161 +MRR: 54000 The modem has connected to the line at 54000 bps and carrier reporting is enabled. (See S95
and Xn.)
162 +MRR: 56000 The modem has connected to the line at 56000 bps and carrier reporting is enabled. (See S95
and Xn.)
165 CONNECT 32000 The modem has connected to the line at 32000 bps and DCE speed reporting is enabled.
166 CONNECT 34000 The modem has connected to the line at 34000 bps and DCE speed reporting is enabled.