Futaba 8FGAS, 8FGHS 2.4GHz - Manual (Page 111)

111 <Model Menu (Airplane/Glider Functions)>
When setting a rate selection switch, move
the cursor to the switch item and touch the
RTN button to access the selection screen.
Select the switch and set its ON direction.
(Always ON at "--" setting)
*For a description of the switch selection method, see the
description at the back of this manual.
●Gyro type selection
Move the cursor to the gyro type selection
item and touch the RTN button to switch to
the data input mode. Select the gyro type
by scrolling the touch sensor.
[GY]: When a Futaba GYA gyro is used
[NORM]: When using something other than
Futaba GYA gyro is used.
Touch the RTN button to change the gyro
type and return to the cursor mode.
*When a Futaba GYA gyro is used and [GY] type is selected,
the sensitivity set value is directly read in both the AVCS
and NORM modes.
●Operation mode selection (GYA gyro)
Move the cursor to the operation mode
selection item and touch the RTN button
to switch to the data input mode. Select
the operation mode by scrolling the touch
sensor.
[AVCS]: AVCS mode
[NORM]: Normal mode
Touch the RTN button to change the
operation mode and return to the cursor
mode.
●Sensitivity setting
Move the cursor to the sensitivity item and
touch the RTN button to switch to the data
input mode.
Adjust the sensitivity by scrolling the touch
sensor.
Initial value: 0%
Adjustment range: 0~100%
*When the RTN button is touched for one second, the
sensitivity is reset to the initial value.)
Touch the RTN button to return to the cursor
mode.
(Example) Setting three axis using a GYA430 and GYA431 (2)
● Wing type: Aileron 2 servos mounted fuselage selected
● Set
5CH → GYRO (GYA431AIL), 7CH → GYRO2 (GYA431ELE), 8CH → GYRO3 (GYA430RUD), CTRL
and TRIM → [--] : at the Function menu of the Linkage menu.
● GYRO setting of the Model menu.
*Set so that Rate 1 is turned on at the back position of switch E and Rate 3 is turned ON at the front position. Since
switch E is turned OFF at the center, Rate 2 remains [INH].
Rate GYRO GYRO ２ GYRO ３ TYPE ACT/INH SW
#1 AVCS : 60% AVCS : 60% AVCS : 60% GY OFF/ON SE
#2 INH
#3 NORM : 60% NORM : 60% NORM : 60% GY ON/OFF SE