Futaba 8FGAS, 8FGHS 2.4GHz - Manual (Page 76)

76 <Functions of Linkage Menu>
● Select the function name
and return to the Linkage
menu by touching the
RTN button.
<SensorTouch™>
T1-T4 SET. Digital trim settings
This function adjusts the digital trim's step
amount and operation mode (T1~T4.)
When the flight conditions are set, the trim
operation can be coupled with the conditions when
combination mode is selected.
The T8FGS's unit of trim is displayed on the
home screen.
Control step amount setting
1. Move the cursor to the [STEP] item and touch
the RTN button to switch to the data input
mode.
2. Set the control step amount by scrolling the
touch sensor.
Initial value: 4
Adjustment range: 1~200
*When the RTN button is touched for one second, the control
step amount is reset to the initial value.
*When the value is increased, the change per step becomes
larger.
3. Touch the RTN button to end adjustment and
return to the cursor mode.
Separate/combination mode selection
1. Move the cursor to the [MODE] item and
touch the RTN button to switch to the data
input mode.
2. Select the mode by scrolling the touch
sensor. A confirmation message appears.
*The display blinks.
[COMB.]: Combination mode. The trim's data
is reflected in all flight conditions.
[SEPAR]: Separate mode. Trim adjustments
are made individually for each flight
condition.
3. Touch the RTN button. (To terminate the input
and return to the original state, touch the S1
button.)
Display unit selection
1. Move the cursor to the [UNIT] item and
touch the RTN button to switch to the data
input mode.
2. Select the mode by scrolling the touch
sensor. A confirmation message appears.
*The display blinks.
[--]: A step number is displayed on the home
screen. There is no unit display.
[ %]: "%" is displayed as a unit.
3. Touch the RTN button. (To terminate the input
and return to the original state, touch the S1
button.)
Trim Memory Operation procedure
1. Move the cursor to the [T1-T4 MEMORY] item
and touch the RTN button to switch to the
data input mode.
2. Select the ACT mode by scrolling the touch
sensor. A confirmation message appears.
*The display blinks.
[INH]: Inhibited
[ACT]: Activated
3. Touch the RTN button. (To terminate the input
and return to the original state, touch the S1
button.)
4. At the home screen, move the cursor to the
trim you want to change and touch the RTN
for one second. The trim display is moved to
the center position.
*When the function is inhibited, the trim position returns to
the actual trim position.
Only the trim displayed on the home screen can
be moved to the center position without changing
the actual trim's memory position.
● Select [T1-T4 SET.] in the Linkage menu and access
the setup screen shown below by touching the
RTN button.
(The display screen is an example. The
screen depends on the model type.)
● Trim operation mode
"COMB.": Combination mode
"SEPAR": Separate mode
Scrolling
● Moving cursor
● Selecting mode
● Adjusting value
● To next page