Prog. mix – Futaba 8FGAS, 8FGHS 2.4GHz User Manual

Page 84

Advertising
background image

84

<Model Menu (Common Functions)>

● Select the function name

and return to the Model

menu by touching the

RTN button.

<SensorTouch™>

PROG. MIX

Program mixing which can be freely customized. Up to five mixings

can be used for each model. [All model types]

Programmable mixing may be used to correct

undesired tendencies of the aircraft, and it may also be

used for unusual control configurations. Mixing means

that the motion of a command channel, called the

"master," is added to the motion of the mixed channel,

called "slave."

You may choose to have the Master's trim added to

the Slave channel response ("Trim" setting). The mixing

curve (Linear/5-point) can be changed. You may select

Mixing ON/OFF switch, control or you may choose to

have mixing remaining on all the time.

The Programmable mixing includes a powerful link

function, which allows Programmable mixing to be

linked with the special mixing functions, or with other

programmable mixing functions. The link function can

be set up for Master and Slave channel individually.

● Select [PROG. MIX] at the Model menu and access

the setup screen shown below by touching the

RTN button.

●Link setting

●Trim mode setting

●ON/OFF

Scrolling

● Moving cursor

● Selecting mode

● Adjusting value

● To next page

Mix setup screen call

● Move the cursor to the mix # whose function you want to activate

and access the setup screen by touching the RTN button.

[Linear curve]

[5-point curve]

●Current mix No.

●Master CH

●Slave CH

●Switch selection

●Curve selection

●Curve selection

●Offset rate(X, Y)

●Mixing rate (Left/right, up/down)

●Point rate (point1-5)

●Mix #

Prog. mix setting procedure
●Activate the function.

Move the cursor to the [ACT] item and touch

the RTN button to switch to the data input

mode.

Select the ACT mode by scrolling the touch

sensor.

*The display blinks.

Touch the RTN button to activate the

function and return to the cursor mode.

*The function is activated. (ON or OFF display)
*ON/OFF switch and mix rate are not set even though the

function is activated.

Advertising