Futaba 8FGAS, 8FGHS 2.4GHz - Manual (Page 53)

53 <Functions of System Menu>
2. With the input next to the desired sensor
highlighted, press the Return (RTN) button one
time.
3. Using the SensorTouch, scroll through the
available models. To select the desired model,
press the Return (RTN) button.
4. Repeat as desired for the remaining sensors.
Using the sensors to select the model:
1. Turn ON the transmitter, activating the Quick
Select screen. If Model (MDL) has been
selected, please be sure to press the Model
(MDL) sensor when powering up the transmitter.
* Please note: Even if the Quick Select function is active, the
Power Mode screen will appear when the transmitter is turned
ON while simultaneously pressing the Return (RTN) button.
2. To select the model assigned to a particular
sensor, double-click the desired sensor. For
example, MODEL- 03 is assigned to S1, double-
click S1 to bring forth all settings, etc. for Model
-03. The T8FGS offers an audible and visual
confirmation as the selected model memory is
changed accordingly.
* If the Return (RTN) button is double-clicked, the T8FGS the
current model is selected as indicated on the display. That is,
the model that was used prior to the last time the transmitter
was turned OFF.
Model Select Screen
This update also allows the Model Select screen to be
accessed immediately upon turning ON the transmitter.
* Please note: this function cannot be utilized at the same time as
the Quick Select function. If more than four models are flown
regularly, we suggest that the Model Select function be utilized
as it will save time when selecting the desired aircraft. If four,
or fewer, models are flown, the Quick Select option would be the
best choice.
* Please note: the Model Select function does not allow access
to the RENAME, COPY or DELETE options. To utilize one
of these options, please access the Model Select screen in the
typical manner as described in the complete instruction manual.
1.The Start Selection (START SEL.) menu is accessed
through the T8FG’s System Menu. Turn the
transmitter ON and then press the SYS (System)
button two times. Use the SensorTouch™ to
highlight the Start Selection (START SEL.) and
then press the Return (RTN) button to confirm the
selection.
2. The Start Selection (START SEL.) menu option
defaults to OFF meaning that Quick Select
and Model Select are not applicable. To
activate the Quick Select or Model Select, use
the SensorTouch to scroll to the OFF setting as
denoted in the image. With the OFF indication
highlighted, press the Return (RTN) button and
rotate the SensorTouch once again to scroll to
the Model Select (MODEL SEL.). Press the Return
(RTN) button once again to activate Model
Select as indicated.
Model Select Activation:
With the Model Select (MODEL SEL.) option
activated, there are two additional options available
for customization; ALWAYS and MDL (Model).
These options determine if/when the Model Select
information will appear on-screen. ALWAYS, as the
name suggests, indicates that each time the transmitter
is powered-up, the Model Select information will
appear on-screen. The MDL (Model) setting indicates
that the Model Select information will appear on-
screen only when the MDL button is pressed
simultaneously as the transmitter is turned ON.
With the Model Select mode highlighted, use the
SensorTouch to move to the activation setting options.
Model (MDL) is the default setting. Press the Return
(RTN) button to bring forth the options, then scroll
to the ALWAYS setting using the SensorTouch pad.
Press the Return (RTN) button once again to finalize
the selection.
Using the Model Select Function: