Futaba 8FGAS, 8FGHS 2.4GHz - Manual (Page 52)

52 <Functions of System Menu>
● Select the function name
and return to the System
menu by touching the
RTN button.
<SensorTouch™>
MODE OFF
START SEL.
Setting Up and Adjusting the Quick Select Models
1. The Start Selection (START SEL.) menu is
accessed through the T8FG’s System Menu.
Turn the transmitter ON and then press the
SYS (System) button two times. Use the
SensorTouch™ to highlight the Start Selection
(START SEL.) and then press the Return (RTN)
button to confirm the selection.
MODE OFF
START SEL.
2.The Start Selection (START SEL.) menu option
defaults to OFF meaning that Quick Select
and Model Select are not applicable. To
activate the Quick Select or Model Select,
use the SensorTouch to scroll to the OFF
setting as denoted in the image. With the
OFF indication highlighted, press the Return
(RTN) button and rotate the SensorTouch once
again to scroll amongst the options. With the
Quick Select (QUICK SEL.) indicated, press the
Return (RTN) button once again to make the
desired selection as indicated.
Quick Select Activation:
With the Quick Select (QUICK SEL.) option
activated, there are two additional options available
for customization; ALWAYS and MDL (Model).
These options determine if/when the Quick Select
information will appear on-screen. ALWAYS,
as the name suggests, indicates that each time
the transmitter is powered-up, the Quick Select
information will appear on-screen. The MDL
(Model) setting indicates that the Quick Select
information will appear on-screen only when
the MDL button is pressed simultaneously as the
transmitter is turned ON. With the Quick Select
mode highlighted, use the SensorTouch to move to
the activation setting options. Model (MDL) is the
default setting. Press the Return (RTN) button to
bring forth the options, then scroll to the ALWAYS
setting using the SensorTouch pad. Press the Return
(RTN) button once again to finalize the selection.
Assigning models to the sensor buttons:
There are four sensors/buttons that correspond
with the SensorTouch: Link (LNK), Model (MDL)
System (SYS) and S1. As such, it is possible to offer
up to four models available through the Quick Select
function. We suggest using the models that you fly
most often.
1. Use the SensorTouch, scroll to the desired
sensor/button for the first model; for example,
Link (LNK).
START SEL is a function which starts and can
perform a model selection immediately.
Each time, it is convenient for the modeler
which is enjoying two or more models by one of a
transmitter.
Quick Select Screen
As the name suggests, the Quick Model Select
Function enables the modeler to change the
selected models rapidly each time the transmitter is
turned ON. With a few quick touches, it is possible
to change models whereas before it would require
a multi-step process. The T8FGS stores up to four
models in the Quick Select offerings.
Model Select Screen
The transmitter is turned on, it will move to the
screen of a model selection immediately
START SEL. Immediately, a model selection can be performed