Futaba 8FGAS, 8FGHS 2.4GHz - Manual (Page 139)

139 <Appendix>
FUTABA CORPORATION Phone: +81 475 32 6982, Facsimile: +81 475 32 6983
1080 Yabutsuka, Chosei-mura, Chosei-gun, Chiba-ken, 299-4395, Japan
©FUTABA CORPORATION 2013, 03 (2)
Logic mode
AND: When both switches are ON, the
condition is ON.
OR: When either switche is ON, the
condition is ON.
EOR: When the two switches are in different
states, the condition is ON.
Switch mode selection
1. Move the cursor to the [SINGLE] item and
touch the RTN button to switch to the data
input mode.
2. Select the [LOGIC] by scrolling the touch
sensor.
*[LOGIC] display blinks.
3. Touch the RTN button to change to the
logic switch mode.
(Logic switch setting screen)
Logic mode selection
1. Move the cursor to the logic mode item
and touch the RTN button to switch to the
data input mode.
2. Select the logic mode by scrolling the
touch sensor. [AND, OR or EOR]
*The mode display blinks.
3. Touch the RTN button to change to the
logic mode.
Swich selection
1. Select the right and left switch respectively.
(Refer to the description at the previous
page.)
To return to the preceeding screen, move
the cursor to the [SWITCH] at the top of the
screen and touch the RTN button.
Logic switch (Condition Select function only)
The logic switch function lets you turn operation on and off by combining two switches.