Futaba 8FGAS, 8FGHS 2.4GHz - Manual (Page 49)

49 <Functions of System Menu>
● Select the function name
and return to the System
menu by touching the
RTN button.
<SensorTouch™>
SOUND Turns off the buzzer.
The warning sound and other sound of the
T8FGS transmitter can be turned off.
*When “WARNING” was set to OFF, the no operation alarm
(30 minutes), mixing warning sound, and low battery alarm
sounds are turned OFF.
● Select [SOUND] at the system menu and access
the setup screen shown below by touching the
RTN button.
On/off operation
1. Move the cursor to the [TIMER][WARNING]
or [OTHER SOUND] item and touch the RTN
button to switch to the data input mode.
2. Select the ON or OFF by scrolling the touch
sensor.
*The display blinks.
3.Touch the RTN button.
Low Battery Alarm
The T8FGS includes an audible alarm that sounds
when the transmitter’s battery voltage drops below
a pre-determined setting; adjustable for cell types
and voltages.
Accessing and Activating the Low Battery
Alarm
1. The Low Battery (LOW BATTERY) alarm
voltage is accessed through the T8FG’s
System Menu. Within the System Menu, use
the SensorTouch™ to highlight the SOUND
option and then press the Return (RTN)
button to confirm the selection.
2. Use the SensorTouch to scroll to the Low
Battery (LOW BATTERY) alarm, and then press
the Return (RTN) button to access the voltage
settings. Using the SensorTouch, adjust the
voltage as desired and/or determined by
the transmitter battery pack being utilized.
The voltage options range from 6.0V to 7.4V.
Suggested voltage settings are as follows:
 6-Cell NiCd or NiMH: 6.8V
 2-Cell LiFe: 6.0-6.2V
 2-Cell LiPo: 7.2-7.4V
Scrolling
● Moving cursor
● Selecting mode