Cygnion CG 2400 - Manual (Page 200)

C
G
24
00 Us
er
Gui
d
e
188
188
NOTE: Only one direct
call number can be
stored at a time. When
this feature is on, no
other outgoing calls can
be made, though calls
can still be received.
When turning off the direct call feature, perform the
steps quickly to prevent the direct call number from
dialing.
To store a direct call:
1. Press to access the menu.
2. Select >Settings >Handset >DirectCall and
press . Enable Direct Call? will appear.
3. Press to confirm. DirectC.No is displayed.
4. Enter the number to be called.
5. If a direct call number has been set before, it will
show on the display. To change the displayed
number, press
until the old number is
removed, then enter the new number.
6. Press to confirm the direct call function.
To take an incoming call when direct call is
on:
1. When the phone rings, press to answer the
call.
2. Press any key to end the call.
NOTE: Do these
procedures quickly. If
you do not do each
keystroke within 2
seconds of the previous
one, the direct call
number will be dialed.
To switch the direct call off:
1. Press to access the menu.
2. Select >DirectCall and press . Disable
Direct Call? will appear.
3. Press to confirm. The direct call function is
now off.
Changing Call Forwarding
Destinations
Call forwarding allows a user to route all calls to
another user or mailbox on the system. You can
change your call forwarding destination from the PC
or from the handset. (See “Setting Call Routing” on
page 95.)