Cygnion CG 2400 - Manual (Page 223)

A
ppe
nd
ic
e
s
211
7. When the backup procedure is complete, click
OK.
8. When prompted whether you want to Remove
Shared File? click No to All.
9. The screen displays the progress of the uninstall
procedure.
10. When uninstall is complete, click OK. (Uninstall
may need to reboot your PC at the end of the
procedure.)
To install the software again:
NOTE: Leave the CD in
the drive when you
restart the computer.
You will need the CD in
the drive to complete
installation and run the
installation
Configuration Wizard.
1. Ensure that the CyberGenie@Work server is
closed. Refer to the procedure in “To close the
console:” on page 63 as needed.
2. Insert the CyberGenie@Work CD-ROM into the
drive. When the Install window automatically
opens, click Re-install.
3. Follow the directions on the screen.
To restore backed-up data after a new
install:
1. Copy the following files from the CGbackup000X
folder into the CyberGenie@Work\Data folder:
NOTE: It is also
recommended that you
make a copy of these
files on a floppy disk.
UWAconfig.dat
UWAconfigback.dat
UWAcallLogDB.mdb
Also copy all needed .wav files.
2. Reboot your PC.