Cygnion CG 2400 User Manual

Page 32

Advertising
background image

C

G

24

00 Us

er

Gui

d

e

20

Although CyberGenie’s radio system is capable of
transmitting through most common line-of-site
obstructions (walls, floors, partitions, doors, and
furniture), the signal strength is slightly
diminished by obstructions. Position the base
station in a place that will reduce the number of
obstructions to high phone use areas.

In general, the higher the base station is from the
floor the better. This reduces the need for
transmission through furniture, counters, etc.

A metallic obstruction degrades the signal more
than a non-metallic one. If you have metal
heating/cooling ducts in your walls, mounting
your base station near the ceiling may also
interfere with transmission. In this case, placing
the base station between 3 feet above the floor
and 1.5 feet below the ceiling will give best
results.

Keep your base station clear of other electronic
devices, most specifically: microwave ovens,
television sets, stereos, fluorescent lighting and
other wireless devices (such as cordless
telephones, baby monitors, wireless LAN
hardware, CB radios, and video senders).

Although your base station must be connected to
your PC at all times to operate in full function
mode, keep the base station away from close
proximity with your PC and monitor. A 9-foot USB
cable is included for a broader range when
positioning your base station.

Other things to avoid:

Heat sources (radiators, air ducts, direct sunlight,
etc.)

Excessive moisture (rain, showers, sinks,
humidifiers, etc.)

Extremely high or low temperatures (the base
station’s operating temperature range is 0°–40°

Celsius, or 32°–104° Fahrenheit)

Mechanical vibration

Advertising