Talkswitch 48-CVA - Manual (Page 128)

123 Appendices
Appendix D - Safety Precautions and Regulatory Information
Safety Precautions
Before using TalkSwitch, please review and ensure the following safety instructions
are adhered to:
1. Read, Follow and Retain Instructions – all safety and operating instructions
should be read, followed and retained for future reference before operating
the equipment.
2. Heed Warnings – all warnings on the equipment and in the operating
instructions should be adhered to.
3. Do not operate in environments where the temperature is below 0 degrees
Celsius or 32 degrees Fahrenheit. If the product was shipped in cold weather,
please let the system warm up at room temperature for at least 2 hours
before plugging it in to a power outlet.
4. Moisture – Do not place TalkSwitch in a high-humidity environment.
5. Heat – Never place TalkSwitch near heat sources such as radiators, floor
registers or in direct sunlight.
6. Power Supply – The equipment should only be connected to an approved
power supply of the type described in the operating instructions or marked
on the equipment. Use only the power adapter supplied with TalkSwitch.
7. Damage requiring service – Do not attempt to service the TalkSwitch
yourself. Unplug TalkSwitch and refer servicing to a licensed technician
when:
• The plug or power cord has been damaged.
• TalkSwitch has been exposed to moisture.
• TalkSwitch does not appear to be operating properly or exhibits a
marked change in performance.
TS manual 11th ED_CVA_v11_CD_Release.qxd 7/13/2004 3:36 PM Page 123