Talkswitch 48-CVA - Manual (Page 30)

20 TalkSwitch User Manual
Networked
TalkSwitch’s Call Back and Call Bridge features are configured from this folder.
Both of these features can reduce your company expenses by reducing long
distance costs.
Options
In this folder, advanced settings are configured including audio controls,
troubleshooting and various operating options.
Configuration considerations when connecting multiple units to a LAN.
When 2 or more units are connected to a LAN and are set up for network use, you will
have the ability to configure all units connected to the LAN via the Serial or USB
connection to one of the TalkSwitch units, or a PC connected to the same LAN as the
TalkSwitch units.
When 2 or more TalkSwitch units are connected to the same LAN, they are designed
to act like a single phone system. For example, if you have 2 TalkSwitch units
connected on the same LAN, the system will now function as a single system
supporting 8 lines, 16 local extensions and 16 remote extensions.
You will notice that on some of the configuration pages, there will be up to 4 tabs
across the top that allow you to select each TalkSwitch in the group.
IIm mp po orrtta an ntt::
Anywhere in this manual where there are details specific to the use of TalkSwitch in a
networked configuration, you will see the icon to the left. For people using only 1
TalkSwitch unit, you can ignore any of the comments associated with this icon.
Networked
TS manual 11th ED_CVA_v11_CD_Release.qxd 7/13/2004 3:34 PM Page 20