Talkswitch 48-CVA - Manual (Page 44)

34 TalkSwitch User Manual
Choose a Remote Extension to configure. You must enter a phone number in order
for the extension to be considered active and usable by the system.
Remote phone number:
Enter the phone number of the Remote Extension (note: no specific prefixes are
required other than area codes for long-distance calls - put the number in just as
though you were dialing it from a regular phone). You may use the following in
the space provided: digits 0 - 9, space, comma, dash,
and .
Last Name / First Name:
Enter the first and last name of the person associated to the extension. The last
name is required if the person is to be included in the ‘Dial by Name’ directory
listing used by the Auto Attendant. The person using that extension must also
record their name for the directory following the instructions listed below the
name fields.
Connect using:
Select the Line Hunt Group that TalkSwitch will use to connect the Remote
Extension. This is advantageous if you have an inexpensive long-distance plan
set up for the lines in Hunt Group 84, you may want to use this Hunt Group for
your long-distance Remote Extensions.
TS manual 11th ED_CVA_v11_CD_Release.qxd 7/13/2004 3:34 PM Page 34