Talkswitch 48-CVA - Manual (Page 62)

52 TalkSwitch User Manual
Adjust Sequence:
This section controls how the extensions will ring before the Auto Attendant
answers the call.
• If you have chosen the Auto Attendant to answer calls immediately, this
section does not require configuration and will be greyed out.
• If the Auto Attendant is set to answer after 1 or more rings, you can then con-
figure when specific extensions will ring before the Auto Attendant answers.
• If no Auto Attendant is chosen to answer on the specified line, then you can
specify when particular extensions will ring up to 9 rings. Remember that no
calls will go to voicemail unless you first have an Auto Attendant answer.
3.3.3.4 VoIP Lines
This section deals with how TalkSwitch 48-CVA will handle incoming VoIP calls.
First, select a VoIP line to configure. Then select the appropriate mode for which you
want TalkSwitch to use these settings. If you entered the phone number in the VoIP
Lines section under System Information, the number will appear on the
corresponding button.
TS manual 11th ED_CVA_v11_CD_Release.qxd 7/13/2004 3:35 PM Page 52