Talkswitch 48-CVA - Manual (Page 26)

16 TalkSwitch User Manual
3.2 Running the TalkSwitch software
After installation is complete, double-click the TalkSwitch icon. If TalkSwitch is
currently connected to the same network as your PC, then the configuration software
should automatically detect and retrieve the settings from TalkSwitch (See section
3.3). If TalkSwitch is not yet connected, or connected via the Serial or USB port, then
the following screen will appear with different configuration options.
Connect via Network:
If TalkSwitch is connected on the same LAN as the PC being used to configure the
system, then use this option. Ensure your network cable is properly connected and
the top green LED is on at the back of the TalkSwitch.
Connect via Serial Port:
If TalkSwitch is connected to the PC via a Serial or USB cable, then select this
option and choose the COM port associated to the connection.
Work Offline - Open File:
If you wish to work offline on a configuration file, select this option then press
the Browse button to select the file you wish to view/edit.
Restore Firmware:
This activates the TalkSwitch Firmware Update procedure. Follow the instructions
accordingly.
TS manual 11th ED_CVA_v11_CD_Release.qxd 7/13/2004 3:33 PM Page 16