Talkswitch 48-CVA - Manual (Page 31)

21 3.0 Configuring TalkSwitch
3.3.1 System Information
3.3.1.1 Administration
This tab allows you to assign a System name and Administrator password for
TalkSwitch. The Administrator password gives access to all configuration options.
The password that is entered here will be used at configuration start-up and through
Touch Tone configuration.
System Name:
For tracking purposes, a system name can be assigned. The name can also be
configured to appear as Caller ID information for all outgoing calls.
System Password:
To activate the use of a system password, enter a 4- to 8-digit password. The
password can only contain numbers, since it is also used to gain access to the
system using a touch-tone phone.
If you do not want a password, or want to delete the existing password, simply
clear the password field and click ‘Ok’.
If the administrator forgets the password, the only option to gain access to the
configuration settings is to contact Centrepoint Technologies Technical Support.
TS manual 11th ED_CVA_v11_CD_Release.qxd 7/13/2004 3:34 PM Page 21