KERN & SOHN DBS 60-3 - Manual (Page 11)

DBS-BA-e-1311 11
a
Status display „Equipment“
Top Is displayed when the heated cover
is open.
Flashes when the heated cover
needs to be closed.
Goes out when heated cover is
closed
Centre Is displayed when the heated cover
is open.
Goes out when heated cover is
closed
Flashes when drying process is
active
Bottom Indicates that a sample is in the
sample dish.
Flashes when a sample needs to be
loaded.
Goes out if there is no sample in
the sample dish.
Indicates that a sample is in the
sample dish.
Flashes if taring is required.
Goes out if no sample dish is in
place.
Indicates upon switch-on that the
dish holder is installed.
Flashes upon switch-on if the dish
holder is not installed.