KERN & SOHN DBS 60-3 - Manual (Page 49)

DBS-BA-e-1311 49
9.2.1.4 SLOW Drying mode (Slow drying)
The Slow drying temperature is increased more slowly to the preset value than for
Standard drying.
The drying will end depending on the setting, when the preset time has expired or
the preset weight loss (
∆M) remains constant for 30 seconds.
Slow drying is suitable for samples that cannot tolerate rapid heating by the heaters.
The same applies to samples that form a skin during rapid heating. This skin will then
affect the evaporation of the trapped moisture.
Settings:
• SLOW Drying mode
• Drying temperature
• Drying time switch-off criterion or ∆M
 Press the Menu button to access the menu and
the first menu item “PRoGRM” will be displayed.

 Press navigation button , then use navigation
buttons
  to select “SLOW”.
 Press ENTER to confirm and the currently preset
drying temperature will flash in the display.
 Use navigation buttons   to select the
required setting,
50°C – 200°C (1°C increments) can be selected.