KERN & SOHN DBS 60-3 - Manual (Page 41)

DBS-BA-e-1311 41
 Close heated cover and measuring will start
automatically.
• If measuring does not start automatically, the equipment is preset for
Manual start. Press the START button to start.
• Manual or Automatic start can be selected in the menu, see chap. 9.2.3
• Observe hazard information,
see Chapter 3.5 “Hazards during and after measuring”
 When drying is finished, you will hear an acoustic
signal and the heating will be shut off.
 The measuring result, marked by the indicator [ ]],
will be displayed.
 The blower will switch off automatically after a short
time.
 Press the ON/OFF button for further measurements
and the equipment will revert to Moisture analysis
mode. The indicator [ ]] will go out.
 Finish drying, see chap. 8.3
When an optional printer is connected, the measurement log will be edited
independently on the settings in the menu, see chap. 11.3