KERN & SOHN DBS 60-3 - Manual (Page 83)

DBS-BA-e-1311 83
13 Service, maintenance, disposal
13.1 Cleaning
+ Before any maintenance, cleaning and repair work disconnect the
appliance from the operating voltage.
+ Only carry out cleaning tasks when the equipment has cooled down.
1. Display Please do not use aggressive cleaning agents (solvents or
similar agents), but a cloth dampened with mild soap suds.
2. Wind
protection ring
Remove wind protection ring / sample dish, wet clean and dry
thoroughly before fitting
3. Sample dish
4. Housing Please do not use aggressive cleaning agents (solvents or
similar agents), but a cloth dampened with mild soap suds.
Take care that the device is not penetrated by fluids and polish
it with a dry soft cloth.
Loose residue sample/powder can be removed carefully with a
brush or manual vacuum cleaner.
Remove any spilt sample material immediately.
5. Protective
glass guard
Remove protective glass guard (see chap. 13.1.1) and clean
with a commercially available glass cleaner.
6. Heat shield Remove heat shield, wet clean and dry thoroughly before
fitting