KERN & SOHN DBS 60-3 - Manual (Page 18)

18 DBS-BA-e-1311
! Explosive, easily flammable samples and samples that go into a chemical
reaction when subjected to heat, may not be analysed with the moisture
analyser.
! Sample materials emitting toxic substances must be dried with a special
extraction system in place. Create an environment that prevents the inhalation
of vapours hazardous to health.
! Sample materials developing aggressive vapours (e. G. Acids) may cause
corrosion problems on some parts of the device.
! Careful when removing the sample. The sample itself, the sample dish and
the heating unit may be very hot.
! Maintain sufficient space in the environment of the equipment to prevent heat
build-up (distance from the equipment 20cm, upwards 1m).
! Do not operate the humidity analyser in areas with hazard of explosion
! Do not place anythin which may interfere the unplugging
! The power plug must be easily accessible