KERN & SOHN DBS 60-3 - Manual (Page 46)

46 DBS-BA-e-1311
9.2.1.2 Drying mode TIME
(Standard drying/switch-off criterion “Time“)
The drying will be carried out at the drying temperature preset by the user and will
end automatically when the preset time has expired.
S
ETTINGS :
• Drying mode TIME
• Drying temperature
• Drying time
 Press the Menu button to access the menu and
the first menu item “PRoGRM” will be displayed.

 Press navigation button , then use navigation
buttons
  to select “TIME”.
 Press ENTER to confirm and the currently preset
drying temperature will flash in the display.
 Use navigation buttons   to select the
required setting,
50°C – 200°C (1°C increments) can be selected.
 Press ENTER to confirm selection. The currently
set drying time is displayed.
 Use navigation buttons   to select the
required setting, 1 minute – 4 hours (1 minute
increments) or 4 hours - 12 hours (1 hour
increments) can be selected
 Press ENTER to save.
 Press ESC to return to Moisture analysis mode.
The equipment is ready to measure
(see chap. 8.1). All the settings that have been
made control the drying process.