KERN & SOHN DBS 60-3 - Manual (Page 28)

28 DBS-BA-e-1311
5.4 Mains connection
Power supply is provided via the supplied mains cable.
Check, whether the voltage acceptance on the scales is set correctly. Do not connect
the appliance to the power grid unless the information on the appliance (sticker)
matches the local mains voltage.
Important:
Does the labelling match the local mains voltage?
-
Do not connect if mains voltages are different!
-
If matching, connect the scales.
The moisture analyzer must be connected to a standard socket with earth terminal.
Do not eliminate the protective effect by using an extension lead without earth
terminal. For power supplies from power grids without earth terminals call a specialist
to establish equivalent protection according to the relevant installation regulations.
-
The power plug must be always accessible.
-
Before operating, check all cables for damage.
-
Guide the cables so that they cannot become damaged or interfere with the
measuring process.