KERN & SOHN DBS 60-3 - Manual (Page 9)

DBS-BA-e-1311 9
RAPID
+
see chap. 9.2.1.3
Heating-up period “pre-heating
step”
The pre-heating step is switched
on until “
∆M pre-heating step” is
constant.
Temperature is lowered to the
preset drying temperature.
Preset drying temperature is
reached.
The drying is finished when the
preset completion criterion is
fulfilled.
SLOW
+
see chap. 9.2.1.4
Heating-up period
Preset drying temperature is
reached.
The drying is finished when the
preset completion criterion is
fulfilled.
STEP
+
see chap. 9.2.1.5
Heating-up period step 1
Drying step 1
Heating-up period step 2
Drying step 2
Heating-up period step 3
Drying step 3