KERN & SOHN DBS 60-3 - Manual (Page 57)

DBS-BA-e-1311 57
10 Miscellaneous settings
10.1 Enter sample designation
A 4-digit sample code can be saved for a sample under menu item “CoDE”. This is
output in the measuring protocol.
Options:
1st and 2nd digit: „0 – 9“ or „A –Z“ or „_“
3th and 4th digit: “0-9” (the value is automatically increased by “1” for each
measurement, it reverts to “00” upon reaching “99”)
Default setting: „0000“
 Press the Menu button to access the menu and
the first menu item “PRoGRM” will be displayed.

 Use the navigation keys   to select the
menu item „CoDE“ .
 Press ENTER to confirm and a 4-digit number
will be displayed. The active digit is flashing.
 Use the navigation buttons to enter the required
sample designation, see chap. 7.1.1 “Numerical
input”.
 Press ESC to return to Moisture analysis mode.