KERN & SOHN KET-TM User Manual
Kern ken-tm / ket-tm, Kern & sohn gmbh
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1 Technical data
- 2 Control elements and program structure
- 3 Basic instructions
- 4 Basic Safety Precautions
- 5 Transport and storage
- 6 Unpacking, Setup and Commissioning
- 7 System settings (menu)
- 8 Application settings
- 8.1 Select application
- 8.2 Application specific settings
- 10.1 Select application
- 10.2 Application specific settings
- 10.3 Carry out parts counting
- 10.4
- 11.1 Select application
- 11.2 Application specific settings
- 11.3 How to carry out percentage calculation
- 12.1 Select application
- 12.2 Application specific settings
- 12.3 Defining recipe in database
- 12.4 Process recipe from database
- 12.5 Log recipe
- 13.1 Select application
- 13.2 Application specific settings
- 13.3 Dynamic weighing using manual start
- 13.4 Dynamic weighing with automatic start
- 14.2 Search for Data Record / Add Data Record
- 14.3
- 14.4 Deleting data record (administrator only)
- 14.5 Print data record
- 14.6 Basic data record operations via context menu
- 14.7 Edit databases (administrator only)
- 16.1 Overview interface commands
- 16.2 General response format
- 16.3 Detailed information about interface logs
- 16.3.1 Zeroing
- 16.3.2 Taring
- 16.3.3 Retrieve tare value
- 16.3.4 Set tare value
- 16.3.5 Send stable weighing value in standard weighing unit
- 16.3.6 Send weighing value immediately in standard weighing unit
- 16.3.7 Send weighing values for all platforms in default weighing unit immediately
- 16.3.8 Send stable weighing value in current weighing value
- 16.3.9 Send weighing value immediately in current weighing unit
- 16.3.10 Start continuous output in standard weighing unit
- 16.3.11 Stop continuous output in standard weighing unit
- 16.3.12 Start continuous output in current weighing unit
- 16.3.13 Stop continuous output in current weighing unit
- 16.3.14 Set value for “Lower Threshold“
- 16.3.15 Set value for “Upper Threshold“
- 16.3.16 Retrieve value for “Lower Threshold“
- 16.3.17 Retrieve value for “Upper Threshold“
- 16.3.18 Press simulation “PRINT key“
- 16.3.19 Send all implemented messages
- 16.4 Data format
- 9 Weighing
- 10 Parts counting
- 11 Percent determination
- 12 Formulation
- 13 Animal weighing
- 14 Database
- 15 Logs
- 16 Communication
- 17 Servicing, maintenance, disposal
- 18 Troubleshooting guide / error messages
- 19 Appendix A – Variables for printouts
- 20 Appendix B – list “Function Keys“
- 21 Installation display unit / platform
- 22 Conformity explanation/ test certificate