Testing, Test screen – PRG Bad Boy Field Service Manual User Manual
Page 22
14
BAD BOY
®
SPOT LUMINAIRE FIELD SERVICE MANUAL
TESTING
Test Screen
The luminaire provides built-in test routines and recalibration
options which can be accessed through the Menu Touchscreen.
Actions may be applied to specific mechanisms, or in some
cases, to all mechanisms at once. At the Home screen, press the
Test panel to bring up the Test screen.
Options are as follows:
+
Re-Cal - press to bring up Recalibration Screen.
+
Re-Call ALL - press to bring up Re-Cal ALL Yes/No options.
+
Disable - press to bring up Disable Screen.
+
Mech Test - press to bring up Mech Test Screen. (See
on page 15 for more explanation of this
screen.)
+
Clean Lenses - press to position lenses so that all surfaces
may be cleaned with a cloth. (Note that pressing the button
does not actually clean the lenses.) Refer to
on page 36 for complete lens cleaning instructions.
+
Group Test - allows multiple Bad Boy luminaires to be run
through a configurable test sequence when chained together
via DMX512 or Ethernet. (See
more explanation of this screen.)
Press TEST to
bring up Test screen
Test Sub-Menu Screens