Cleaning gobo, color and dimmer wheels – PRG Bad Boy Field Service Manual User Manual
Page 47
BAD BOY
®
SPOT LUMINAIRE FIELD SERVICE MANUAL
39
Cleaning Gobo, Color and Dimmer Wheels
Tools:
Micro Fiber cloth (06.6085.0001.0)
OptiMax™ Ultra Pure Cleaning Solution (06.6084.0001.0)
Cotton gloves or finger cots
#2 Phillips screwdriver
To clean gobo, color and dimmer wheels:
CAUTION:
Use ONLY OptiMax™ Ultra Pure Cleaning Solution to clean optical components. DO NOT use
Window Cleaner on gobo, color, or dimmer wheels! Wear cotton gloves or finger cots when handling optical
components.
CAUTION:
The optical components are very fragile, use extreme caution when cleaning! Color gobos have
thin layers applied to one side that can be damaged if cleaned too roughly. Use caution.
WARNING:
Remove power from luminaire before this procedure.
Step
1. Remove power from luminaire.
Step
2. Remove Head Covers. (Refer to
Step
3. To clean Gobos:
a.
Remove each gobo. (Refer to
b.
Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, carefully clean gobos.
DO NOT
use window cleaner!
Step
4. To clean Designer Wheel:
a.
"Replacing a Designer Color Filter"
b.
Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, carefully clean filters.
DO NOT
use window cleaner!
Step
5. To clean Color Wheels:
a.
Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, carefully clean color wheels.
DO
NOT use window cleaner!
b.
Rotate wheels to access all surfaces. It will also be necessary to rotate the Gobo Wheel in order to use
the gobo "open" position to access some parts of the Color Wheel.
Step
6. To clean Dimmer Wheel:
a.
Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, carefully clean Dimmer Wheel.
DO NOT use window cleaner!
b.
Rotate wheel to access all surfaces. It will also be necessary to rotate the Color Wheels in order to use
the "open" position to access some parts of the Dimmer Wheel.
Step
7. Replace Head Covers.