PRG Bad Boy Field Service Manual - Manual (Page 58)

50 BAD BOY ® SPOT LUMINAIRE FIELD SERVICE MANUAL
Replacing the Front Glass
Parts:
12.9812.0629 1 EA RETAINER, FRONT GLASS PAINTED
41.9812.0628 1 EA FRONT GLASS
Tools:
Hook & Pick tool
WARNING: Remove power from luminaire before performing any maintenance procedures.
To replace the Front Glass:
Step 1. Remove power from luminaire and allow components to cool for at least 5 minutes.
Step 2. Position luminaire head so that Front Glass is facing upward. (To prevent it from falling onto the floor when
the Retaining Ring is removed in the next step.)
Step 3. Insert hook & pick tool under notch in Front Lens Retaining Ring. Carefully remove Retaining Ring.
Step 4. Remove Front Glass.
Step 5. Install new Front Glass by doing steps in reverse.
Note: Clean Front Glass with OptiMax™ Ultra Pure Cleaning Solution and Micro Fiber cloth only. DO NOT use
window cleaner! Refer to "Cleaning the Lenses" on page 36 for more information.
Figure 3-18: Removing Front Glass
Front Glass
Retaining
Notch
Ring