PRG Bad Boy Field Service Manual - Manual (Page 54)

46 BAD BOY ® SPOT LUMINAIRE FIELD SERVICE MANUAL
Step 5. Using fingers, grasp frame of gobo and pull out of wheel (Figure 3-14).
Figure 3-14: Replacing a Gobo
Step 6. Noting proper orientation, insert new gobo into wheel. Ensure that the "tongue" of the gobo clip goes under
the retaining plate (under the sun gear). Press and gently rotate the gobo bearing to help mesh the gobo
gear to the sun gear. Refer to Figure 3-15 on next page for an overview of gobo positions and alignment.
Step 7. Close head cover access door.
Gobo
Open Hole (no gobo)
Wheel
Note: Drawing is flipped 180°
for clarity purposes.
Carrier
Sun Gear
Locking Tab
Tongue
Tab
1
2
3
4
5
6 7
Retaining Plate