PRG Bad Boy Field Service Manual - Manual (Page 48)

40 BAD BOY ® SPOT LUMINAIRE FIELD SERVICE MANUAL
Cleaning the Reflector
Tools:
Micro Fiber cloth (06.6085.0001.0)
OptiMax™ Ultra Pure Cleaning Solution (06.6084.0001.0)
#2 Phillips screwdriver
To clean reflector:
CAUTION: Use ONLY OptiMax™ Ultra Pure Cleaning Solution to clean optical components. DO NOT use
Window Cleaner on the reflector!
WARNING: Remove power from luminaire before this procedure.
Step 1. Remove power from luminaire and allow components to cool for at least 5 minutes.
Step 2. Remove Wheel Stack Assembly. (Refer to "Replacing the Wheel Stack" on page 51.)
Step 3. Remove UV/IR Window Assembly as required. Refer to "Replacing the UV/IR Window Assembly" on
page 66.
Step 4. Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, clean reflector.
DO NOT use window cleaner!
Step 5. Re-assemble luminaire.
Figure 3-9: Cleaning Reflector
Aft Cover
Reflector
UV/IR Window
Assembly
4-40 x 1/4" PPSS
Screw (4)