Calculate, Data, String – Anritsu MP1777A User Manual
Page 101: Calculate : data? <string, 5 calculate subsystem
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Section 8 Device Message Details
8.3.5 CALCulate Subsystem
The CALCulate subsystem performs the performance measurement setting and measured result display.
: CALCulate
; DATA^
<string>
: CALCulate : DATA? <string>
Command type
Sequential command
Parameter
<string> = <STRING PROGRAM DATA>
Response
<string> = <STRING RESPONSE DATA>
See the Table 8-1 for <string>.
Function
Reads the measured results.
Example of use
> : CALCulate : DATA? "CURRent : JAMPlitude : PTPeak"
< 1.00
Table 8-1 String
Item
<string>
Response Format
Jitter manual measurement
CURRent
Peak to Peak
"[CLiRRent:] JAMPlitude : PTPeak"
Form 6
4-Peak
"[CURRent:! JAMPlitude : PPEak"
Form 6
-Peak
"[CURRent:] JAMPlitude : MPEak"
Form 6
RMS
"[CURRent:] JAMPlitude : RMS"
Form 6
LAST
Peak to Peak
"LAST : JAMPlitude : FfPeak"
Form 6
-rPeak
"LAST : JAMPlitude : PPEak"
Form 6
-Peak
"LAST : JAMPlitude : MPEak"
Form 6
RMS
"LAST : JAMPlitude : RMS"
Form 6
8-24
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888)