4 compounding commands, 4 compounding commands -5 – Anritsu MP1777A User Manual
Page 76
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7.4 Compounding Commands
7.4
Compounding Commands
Commands can be compounded by using semi-colon ( ; ) as shown by the example below.
The second command is also referenced as the command located at the same level as the lowest hierarchical level of the
first command.
For this reason, the second command can be described in a full path as shown by Example 1. Flowever, as Example 2
shows, headers located in the layer above Type can also be abbreviated.
Example 1:
> :
SENSe : TELecom : PATTem ; TYPE UWORdlb ; : SENS : TELecom : PATTem : UWORd "1100110011001100"
Example 2:
> :
SENSe ; TELecom : PATTem : TYPE UWORdlb ; UWORd "1100110011001100"
7-5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOUR