A.1 command errors – Anritsu MP1777A User Manual
Page 113
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A.1 Command Errors
The error codes, [-199 and -100], indicate that syntax errors of IEEE488.2 have taken place. In this case, bit 5 of the event
status register of the device is set.
Errors take place when the following events take place.
• When the device has received a message in violation of the 1EEE488.2 standards,
» When the device has received a header that does not conform to the stipulations of the device-specific commands or
common commands.
- When GET (Group Execute Trigger) is sent to the program message.
Appendix A SCPI Error Messages
A-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888)