Anritsu MP1777A User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3.1 Listener Input Program Message Format
The WKIlTe and RTAD coniniands take tlic foilo\vin>t fonnals.
WRITE @
Outputs data to the device.
i
■a r u m i a L
WRITE @
Data-
Device number : Data
Arithmetic expression
Character string expression
<Example> The same as the example given on the previous page.
WRITE @03 : SENS ; TEL : RANG UI4 ; : SENS : TEL ; BRAT M9953"
i
Listener address
(in case that the GPIB address of the 10 GHz Jitter Analyzer is set at 3)
READ @
Substitutes the data input from the device to the variable.
K Format-------------------------------------------------------------
READ @Device number : Variable
<Example> Substitutes the data input from the device (input tangential line setting)
to the variable, A$.
WRITE @03 SENS : TEL : RANG')'" <- Inquires about the input
READ @03 : A$
tangential line setting,
i
Listener address
(in case that the GPIB address of the 10 GHz Jitter Analyzer is set at 3)
3-3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOUR