Status : operation [:event, 7 status subsystem – Anritsu MP1777A User Manual
Page 106
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8.3 Device-Specific Commands
8.3.7 STATUS Subsystem
The STATUS subsystem performs control (setting and display) of the status registers.
STATUS
PRESet
OPERafion
[:EVENt]?
CONDition?
ENABIe---------
ENABIe?
PTRansition -
PTRansition?
NTRansition -
NTRansition?
INSTrument -
[;EVENt]?
CONDition?
ENABIe-------
ENABIe?
PTRansition -
PTRansition?
NTRansition -
NTRansition?
<numeric>
<numeric>
<numenc>
<numeric>
<numeric>
<numeric>
: STATUS : PRESet
—
Command type
Sequential command
Parameter
None
-
Function
Initializes status registers.
See the Section 6 "Status Report".
Example of use
> : STATUS : PRESet
: STATUS : OPERation [:EVENt]?
Command type
Response
Function
Example of use
Sequential command
<numeric> = <NRI NUMERIC RESPONSE DATA>
0 to 32,767 ..........Sum (decimal digit) of event register bits
Makes a query of the details of the event register of the OPERation status event register.
When the INSTrument status register summary bit of the OPERation status event register is
ON.
> : STATUS
; OPERation ; EVENt?
<8192
8-29
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888)