Sense : measure : state – Anritsu MP1777A User Manual
Page 96
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
: SENSe : MEASure : STATe?________________________________________________________________
Command type
Sequential command
Response
<mestype>, <numeric>
<mestype> = <CHARACTER RESPONSE DATA>
MAN............. Manual measurement
NON..............No target measurement found
<numeric> = <NR1 NUMERIC RESPONSE DATA>
0 ................ Measurement completed
1 ................Measurement currently being performed
Function
Makes a query of the measurement
status.
Restriction
Measurement of only one item enabled to be executed.
When no measurement is performed, the following indication is output.
< NON, 0
Example of use
> : SENSe ; MEASure : STATe?
< MAN, 1
8.3 Device-Specific Commands
: SENSe : MEASure : : STAR!
Command type
Sequential command
Parameter
None
Function
Begins measurement.
Example of use
Begins measurement.
> : SENSe : MEASure : STARt
: SENSe : MEASure : : STOP
Command type
Sequential command
Parameter
None
Function
Halts measurement currently being executed.
Restriction
None
Example of use
> : SENSe ; MEASure : STOP
8-19
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888)