9 <query program header, Query program header> -12 – Anritsu MP1777A User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3.2.9 <QUERY PROGRAM HEADER>
The <QUERY PROGRAM HEADER> is defined as follows.
The <white space> can be placed before each header.
Section 3 Listener Input Format
(1) The <Instrument-Control Headers> are defined as follows.
(2) The <common query program header> is defined as follows.
__________^
<program mnemonio
Refer to (3) of 3.2.8
3.2.9.1 <QUERY PROGRAM HEADER>
The <QUERY PROGRAM HEADER> is a query command, that the controller preliminarily sends to this measuring
instrument so that the controller will be able to receive the response message from this measuring instrument.
It is always characterized by the addition of the query indicator, or a question mark ( ? ), to the end of the header.
The <QUERY PROGRAM HEADER> format mentioned above comes with the query indicator, or a question mark ( ? ),
added to the end of the header
As other features are the same as those for the <COMMAND PROGRAM HEADER>, see the Section 3.2.8 "<COM
MAND PROGRAM HEADER>" for more information.
3-12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888)