Anritsu MP1777A - Manual (Page 114)

A.1 Command Errors
Table A-1 Error Messages of Command Errors
Code Message Error Detection Condition
-101 Invalid character An invalid character i.s included in the header or the parameter.
E x a m p le : 1. A # is included in the header.
: SENSe : TELecom : #RATe Ml39
2. A $ is included in the parameter.
: SENSe : TELecom : PATTem : TYPE PRB$11
-104 Data type error The parameter type is different to the type specified.
-105 GET not allowed A Group Execute Trigger was sent to the program message.
-108 Parameter not allowed The number of parameters is greater than the number specified.
E x a m p le : Four parameter have been sent to the Section where two param­
eters were originally specified.
; SENSe : TELecom : DEMux : ROUTe M34,1,M8,2
-112 Program mnemonic too long A program mnemonic comes in 12 or more characters.
E x a m p le : A colon is missing from the header.
: CALCulate : TELecom : PERFormanceTYPE G821
-113 Undefined header Although the header syntax is correct, it is not defined by the device.
E x a m p le : The header was erroneously written.
; SENSe : TELecom ; DEMux : ROOT M34.1
-120 Numeric data error An error was found in the numeric data.
-121 Invalid character in number An inappropriate character is included in the numeric data.
E x a m p le : A sign is included in the numeric data.
: SENSe : TELecom : M2 : MCHannel 3$
-130 Suffix error An error was found in the suffix.
E x a m p le : A part of data was set in alphabet while the parameter is numeric
data.
: SENSe ; TELecom ; M2 ; MCHannel 31
-144 Character data too long The character data is more than 12 characters.
-150 String data error The string data comes outside the specified range.
E x a m p le : Single and double quotations are mixed.
: Display : MENU ; NAME "SYSTem"
A-3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com