2 command structure, Source, Telecom – Anritsu MP1777A User Manual
Page 74: Brate, Equalizer, Boolean, Fig. 7-1 example of scpi command tree, 2 command structure -3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7.2 Command Structure
7.2
Command Structure
The SCPI command form a hierarchical structure. Commands are divided into groups, each of which consists of com
mands of similar functions, and each group forms a hierarchical structure called the subsystem.
This specification expresses these subsystems by the command tree as shown below.
SCPI allows the same headers to be present in a tree and the difference in the location of the header corresponds to the
difference in the function. Therefore, a command must be described in a full path up to the header to be used.
SOURce
; TELecom
BRATe —
BRATe?
EQUAlizer
<brate>
<boolean>
EQUAlizer?
Fig. 7-1 Example of SCPI Command Tree
7-3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOUR