Status ; operation : instrument : enabie – Anritsu MP1777A User Manual
Page 110
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8.3 Device-Specific Commands
;
STATUS ; OPERation ; INSTrument: ENABIe <numeric>
Command type
Sequential command
Parameter
<numeric> = <DECIMAL NUMERIC PROGRAM DATA>
0 to 32,767 ......... Sum (decimal digit) of event enable register bits
Function
Sets the masking value of the event enable register of the INSTrument register.
Masking at 0.
Example of use
Sets the masking value in a manner that when the bit of alarm change of the event register
switches ON, it will be reported to the OPERation register.
> : STATUS : OPERation ; INSTrument : ENABIe 16
STATUS ; OPERation : INSTrument : ENABIe?
Command type
Response
Function
Example of use
Sequential command
<numeric> = <NR1 NUMERIC RESPONSE DATA>
0 to 32,767 ......... Sum (decimal digit) of event enable register bits
Makes a query of the details of the event enable register of the INSTrument register.
When only the bit of alarm change is enabled.
> : STATUS ; OPERation : INSTrument; ENABIe?
< 16
:
STATUS : OPERation : INSTrument: PTRansition <numeric>
Command type
Sequential command
Parameter
<numeric> = <DECIMAL NUMERIC PROGRAM DATA>
0 to 32,767 ......... Sum (decimal digit) of transition filter bits
Function
Sets the transition filter (a change in the positive direction) of the INSTrument status register.
Set at 1.
Example of use
Sets the bit of measurement completion at PTRansition.
> :
STATUS
: OPERation : INSTrument: PTRansition 2
8-33
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888)