1 interface function, 1 interface function -2 – Anritsu MP1777A User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Section 1 Outline
1.1 Interface Function
The MP1777A has a connector for remote control on the back face.
Remote control of devices is enabled by fitting GPIB.
The GPIB setting is performed on the Secondary system screen in the Main setup screen.
GPIB interface: The GPIB interface for this device conforms to the IEEE (Institute of Electrical and Electronic Engi
neers) standards, 488.1-1987. The software conforms to the standards IEEE488.2 and SCPI (Standard
Commands for Programmable Instruments). (See the Section 7 for more infomiation.)
This device incorporates the following interface functions.
■ Control of functions except for certain functions such as power source switch and Local key.
• Reading of all the setup conditions and screen display.
1-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888)