ADLINK PCI-8258 - Manual (Page 39)

Getting Start with The Installation 25
PCI-8254 / PCI-8258
2.6.2 SW2: Card ID Switch
This switch is used for adjusting card ID for easy identification in
user application programs. Take example. If you set card ID to
”0-0-0-1” (OFF-OFF-OFF-ON) then the card ID is ”1” and the ID
table should be set up as described below:
Card ID Switch Setting (ON=1)
0 0000
1 0001
2 0010
3 0011
4 0100
5 0101
6 0110
7 0111
8 1000
9 1001
10 1010
11 1011
12 1100
13 1101
14 1110
15 1111 (default)