Martin Christ Epsilon 2-10D LSCplus - Manual (Page 102)

Freeze-dryer EPSILON 2-10D LSCplus
8 Maintenance and service
102
Version 04/2013, Rev. 1.5 of 16/12/2014 • sb
Translation of the original operating manual
Pos: 226 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 80 Wa rtun g u nd In stan dhalt ung/ 080 -00 31 Inst and haltu ngsa rbeit en Epsil on @ 25\ mod _14 049 8410 998 2_6 8.do cx @ 1844 89 @ 2 @ 1
8.4 Service
DANGER
In the event of service work that requires the removal of the panels, there
is a risk of electric shock or mechanical injury. Only qualified specialist
personnel is authorised to perform this service work.
The freeze-dryer is subject to high mechanical stress. In order to be able to
withstand this high level of stress, high-quality components were used
during the production of the freeze-dryer. Nevertheless, wear cannot be
excluded and it may not be visible from the outside.
This is why we recommend having the freeze-dryer checked by the
manufacturer during an inspection once per year.
Information and appointments:
From Germany:
Contact
Martin Christ Gefriertrocknungsanlagen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)
Tel. +49 (0) 55 22 / 50 07-33 33
E-mail: [email protected]
Outside Germany:
Contact our agency in your country. All agencies are listed at
www.martinchrist.de [Sales Partners]
NOTE
If you would like to utilise our after-sales-service, please state the type of
your freeze-dryer and its serial number.
Pos: 227 /01 0 Univ ersal mod ule/L eerz eile @ 0\m od_ 120 211 624 450 0_0. docx @ 11 4 @ @ 1
Pos: 228 /01 0 Univ ersal mod ule/L eerz eile @ 0\m od_ 120 211 624 450 0_0. docx @ 11 4 @ @ 1
Pos: 229 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 80 Wa rtun g u nd In stan dhalt ung/ 080 -00 40 Rückse ndu ng defek ter Teile @ 2 5\m od_ 1404 984 111 088 _68. docx @ 18 450 3 @ 2 @ 1
8.5 Return of defective parts
Although we exercise great care during the production of our products, it
may be necessary to return a unit or accessory to the manufacturer.
In order to ensure the quick and economical processing of returns of
freeze-dryers, rotational vacuum concentrators, spare parts, or
accessories, we require complete and extensive information concerning the
process. Please fill in the following forms completely, sign them, enclose
them with the return package, and send them together with the product to:
Martin Christ Gefriertrocknungsanlagen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)